Ardo A1000X Bedienungsanleitung Seite 67

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 88
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 66
SM1
ADDITIONAL FUNCTIONS (AVAILABLE ACCORDING TO MODEL)
-
ON/OFF:
To start the machine, pull the Timer knob outwards, or press the button if the
machine is fitted with one. The indicator light will light up.
Temperature limit button:
Pushing this button will limit the temperature to 60°
when the temperature dial is set at a higher temperature. Symbol E.
No-drain button:
When this button is pushed, the washing machine will stop auto-
matically at the end of the last rinse cycle and before draining the water. In this case,
the washing is held in the water-filled drum to prevent creasing. This function only
works for the delicate wash cycle. Symbol
No-spin button:
The washing machine carries out a normal wash cycle but does not
spin. To do this, press the button with the symbol
Economy wash button:
When the load to be washed is small (less than 3 kg),
push the low water consumption button with the symbol
Additional rinse button:
The washer has been designed so that a minimum amount of water is used, usually
three rinse cycles are enough.
For areas with particularly soft water and for those who are allergic to detergent resi-
due, the washers are supplied with a button for an additional rinse cycle.
500/Max or spin speed button:
Push in for Max rpm. push in egain to release
switch for 500 rpm.
Temperature control:
The temperature control allows you to set the required
temperature. The temperature is programmed by turning the dial clockwise,
until the required temperature is reached. To set the correct temperature for the wash,
refer to the table of programmes on page 10 of the instructions for use.
Spin rpm control dial:
This allows the spin speed to be selected
WARNING: This is only available during intensive wash programmes. For delicates and wool,
the spin speed is 550 rpm regardless of the speed setting.
IMPORTANT:Any changes to the above programme and function settings must only be
made with the machine switched off, i.e. with the main switch in position 0.
9
Seitenansicht 66
1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 87 88

Kommentare zu diesen Handbüchern

Keine Kommentare